Get a total comfort solution for your entire home or business!

The MXL Aurora Series system features a compressor with inverter technology (variable-speed). A variable speed compressor is designed to deliver the capacity required depending on the conditions in the room or rooms you are heating or cooling. Additionally, inverter technology reduces energy consumption up to 30% compared to a traditional fixed speed compressor. The inverter compressor will continue running at lower or higher speeds as needed as opposed to shutting down and restarting as needed like a traditional compressor. This results in minimal temperature fluctuations, providing continuous comfort levels.

The 4MXL36WVJU9 works with wall mounted units including the CTXS and FTXS Standard units as well as the FTXR Emura Series Wall units. FFQ Ceiling Cassette units, CDMQ and FDMQ Concealed Ducted units, and FVXS Floor units are also compatible with the MXL Series multi-zone systems. Depending on the indoor units you choose, with the 4MXL36WVJU9 outdoor unit you will be able to achieve energy efficiency levels of up to 20 SEER, up to 11.7 EER, and up to 9.0 HSPF, in non-ducted installations. Ratings in ducted installations are lower. Comfort control with added savings!

With Daikin's new enhanced capacity quad-zone solution, any three rooms can be controlled individually. It also offers up to 100% Heating Capacity with temperatures as low as 5°F and up to 100% Cooling Capacity when it is as hot as 115°F. The 4MXL36WVJU9 Quad-Zone is rated for 34,400 BTU Cooling Capacity and must be connected to a minimum of two and a maximum of four indoor units. The combined BTU ratings of the units chosen can total up to a maximum connected BTU rating of 48,000 BTUs.

The Daikin 4MXL36WVJU9 incorporates technology which allows you to connect higher BTU indoor units than its 36,000 BTU capacity. This will allow you to address higher load needs that are used at different times such as living spaces and sleeping spaces. Based on the square footage of the rooms you are conditioning, you may need a 15,000 BTU unit for your living room, a 9,000 BTU unit for your bedroom, a 9,000 BTU unit in a second bedroom and a 15,000 BTU unit for the rec room in the basement. With the Aurora Series, you can connect all of these to the 36,000 BTU class 4MXL36WVJU9 outdoor unit. The system will allocate the required BTUs needed in each area up to the total of 34,400 BTUs. Let's say you need to condition the rec room during the day. No one will be in the living room or the bedrooms at this time so you have these zones shut off. When you turn on the system in the living room, the Daikin technology will supply the required BTUs to the living space up to the maximum output of the 15,000 BTU indoor living room unit. A short while later you decide to get the bedroom ready so you turn on the bedroom zone. The system will distribute power to the zones as needed. If all four zones need full power, then each zone will split the 34,400 BTUs respectively, based on each unit's own capacity. For example, the 9,000 BTU units will use approximately 6,500 BTUs while each of the 15,000 BTU units will use approximately 10,750 BTUs per zone. If one zone needs more or is shut off, the system will adjust accordingly.

The 4MXL36WVJU9 Aurora Series outdoor inverter "variable speed" compressor features a space-saving design and quiet operation. With Reactive Temperature Monitoring, once you set your temperature, the system will automatically adjust output according to the condition requirements. It uses R410A refrigerant, the industry standard. It also includes anti-corrosion treatment of the outdoor Heat Exchanger Fin.