| Cooling at 95°F1 |
Maximum Capacity |
BTU/H |
33,200 |
|
| Rated Capacity |
BTU/H |
33,200 |
|
| Minimum Capacity |
BTU/H |
10,300 |
|
| Maximum Power Input |
W |
3,770 |
|
| Rated Power Input |
W |
3,770 |
|
| Moisture Removal |
Pints/h |
9.3 |
|
| Sensible Heat Factor |
0.69 |
|
| Power Factor |
% |
98.0/99.0 |
|
| Heating at 47°F2 |
Maximum Capacity |
BTU/H |
36,000 |
|
| Rated Capacity |
BTU/H |
35,200 |
|
| Minimum Capacity |
BTU/H |
9,800 |
|
| Maximum Power Input |
W |
4,000 |
|
| Rated Power Input |
W |
3,740 |
|
| Power Factor |
% |
99.0/99.0 |
|
| Heating at 17°F3 |
Maximum Capacity |
BTU/H |
22,800 |
|
| Rated Capacity |
BTU/H |
22,400 |
|
| Maximum Power Input |
W |
2,920 |
|
| Rated Power Input |
W |
2,770 |
|
| Heating at 5°F4 |
Maximum Capacity |
BTU/H |
20,500 |
|
| Maximum Power Input |
W |
2,500 |
|
| Heating at -4°F5 |
Maximum Capacity |
BTU/H |
15,900 |
|
| Efficiency |
SEER |
16.2 |
|
| EER1 |
8.8 |
|
| HSPF [IV] |
10.0 |
|
| COP at 47°F2 |
2.76 |
|
| COP at 17°F at Maximum Capacity3 |
2.29 |
|
| COP at 5°F at Maximum Capacity4 |
2.4 |
|
| COP at -4°F at Maximum Capacity5 |
7.5 |
|
| ENERGY STAR® Certified |
No |
|
| Electrical |
Voltage, Phase, Frequency |
208/230, 1, 60 |
|
| Guaranteed Voltage Range |
V AC |
187 - 253 |
|
| Voltage: Indoor - Outdoor, S1-S2 |
V AC |
208/230 |
|
| Voltage: Indoor - Outdoor, S2-S3 |
V DC |
24 |
|
| Short-circuit Current Rating [SCCR] |
kA |
5 |
|
| Recommended Fuse/Breaker Size (Oudoor) |
A |
20 |
|
| Recommended Wire Size [Indoor - Outdoor] |
AWG |
14 |
|
| Power Supply |
Indoor unit is powered by the outdoor unit |
|
| Indoor Unit |
MCA |
A |
1.0 |
|
| Fan Motor Full Load Amperage |
A |
0.76 |
|
| Fan Motor Output |
W |
56 |
|
| Fan Motor Type |
DC Motor |
|
| Airflow Rate at Cooling, Dry |
CFM |
374–602–699–915 |
|
| Airflow Rate at Cooling, Wet |
CFM |
374–602–699–915 |
|
| Airflow Rate at Heating, Dry |
CFM |
374–602–699–803 |
|
| Sound Pressure Level [Cooling] |
dB[A] |
32–42–49–53 |
|
| Sound Pressure Level [Heating] |
dB[A] |
34–42–49–50 |
|
| Drain Pipe Size |
In. [mm] |
5/8 [15.88] |
|
| Coating on Heat Exchanger |
Dual Barrier Coating |
|
| External Finish Color |
Munsell 1.0Y 9.2/0.2 White |
|
| Unit Dimensions |
W x D x H: In. [mm] |
46-1/16 x 11-5/8 x 14-3/8 [1170 x 295 x 365] |
|
| Package Dimensions |
W x D x H: In. [mm] |
51 x 18-1/2 x 14-1/4 [1300 x 470 x 360] |
|
| Unit Weight |
Lbs. [kg] |
45 [20] |
|
| Package Weight |
Lbs. [kg] |
51 [22.9] |
|
| Indoor Unit Operating Temperature Range |
Cooling Intake Air Temp [Maximum / Minimum]* |
°F |
90 DB, 73 WB / 67 DB, 57 WB |
|
| Heating Intake Air Temp [Maximum / Minimum] |
°F |
80 DB / 70 DB |
|
| Outdoor Unit |
MCA |
A |
19.0 |
|
| Fan Motor Full Load Amperage |
A |
0.93 |
|
| Coating on Heat Exchanger |
Blue Fin Coating |
|
| External Finish Color |
Munsell 3Y 7.8/1/1 |
|
| Unit Dimensions |
W x D x H: In. [mm] |
33-1/16 x 13 x 34-5/8 [840 x 330 x 880] |
|
| Package Dimensions |
W x D x H: In. [mm] |
38-3/4 x 16-3/4 x 39 [980 x 420 x 990] |
|
| Unit Weight |
Lbs. [kg] |
121 [55.0] |
|
| Package Weight |
Lbs. [kg] |
138 [62.5] |
|
NOTES:
AHRI Rated Conditions |
1Cooling (Indoor // Outdoor) |
°F 80 DB, 67 WB // 95 DB, 75 WB |
|
|
| (Rated data is determined at a fixed compressor speed) |
2Heating at 47°F (Indoor // Outdoor)
3Heating at 17°F (Indoor // Outdoor) |
°F 70 DB, 60 WB // 47 DB, 43 WB
°F 70 DB, 60 WB // 17 DB, 15 WB |
|
|
| Conditions |
4Heating at 5°F (Indoor // Outdoor)
5Heating at -4°F (Indoor // Outdoor) |
°F 70 DB, 60 WB // 5 DB, 4 WB
°F 70 DB, 60 WB // -4 DB, -5 WB |
|
|
*Outdoor Unit Operating Temperature Range (Cooling Air Temp (Maximum / Minimum)):
• Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.
**Outdoor Unit Operating Temperature Range (Cooling Thermal Lock-out / Re-start Temperatures; Heating Thermal Lock-out / Re-start Temperatures):
• System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures. |